Heavy Duty Cable Control Systems

Push-Pull / Vernier / Locking / Non-Locking

Swivel Assembly

Swivel Assemblies  are use for light cables that require an ability to swivel on the lever assembly and are available for wire sizes .104" (2.6 mm) used in light industrial applications such as throttle cable, vent doors; small valves and lever operated machinery.

click to enlarge

Brackets

Brackets used for various systems and mounting applications 

Pivots

Pivots are used to connect the larger cables with a threaded connector on the end of the cable with a right angle shaft for coupling to a lever allowing for directional movement on the cable and lever. Cable sizes (A) 10-32; 1/4-28; 5/16-24. Shaft Diameter (E) .187; .250; .230; .312; .375 ".

Clamps

Clamps are available in sizes in relation to the cable being secured to the equipment.

Ball Joint

Ball joints are available to couple the threaded cable end with a joint that allows flexing during the operation of the cable with a solid secure mount to the lever of valve. Bolt sizes (A) 1.4-28; 10-32; 5/16-24; ( Larges units are available under ball bushings and ball joints). typical cable sizes 10-32; 1/4-28; 5/16-24.

U-bolt

U-bolts are available for clamping the cable end securely to the machine to hold the cable steady while allowing the inside cable to operate the valve or lever smoothly and are available in sizes to accommodate the cable size.

Back to Cable Controls

[ Parts Index ] [ Parts Locator Network ] [ Parts Database ]